Email:ds5898@163.com Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

Dissolved gas distributor with different type structure and electrostatic discharge resistance requirements

On the release of its understanding and understanding, will continue to go on, because if you want to achieve this level of full, then it is necessary to do so, and can not be careless, so as not to affect the learning effect, As well as the absorption and mastery of knowledge. So, then, will be used to ask this form, to start and carry out, so as to achieve the above purpose.

TJ型释放器.jpg

1.TV-type distributed vibration dissolved gas distributor, which is based on the dissolved gas, the development of the?

TV-type distributed vibration dissolved gas distributor, which from the property point of view, it belongs to the dissolved gas distributor. Therefore, it is in the TS and TJ-type dissolved gas on the basis of the development and improvement of the obtained. Because it is the advantage of absorbing these two dissolving gas dispensers and at the same time, the distribution uniformity of the released water is increased, and the vacuuming device is saved, so that the above conclusions are made.

2.TJ type, TV type and TS type dissolved gas release, their structure, whether the same?

TJ type, TV type and TS type of these three kinds of dissolved gas distributor, they are in the structure, is not the same, because, TJ-type dissolved gas distributor, its structure is the orifice, single hole, disc, tongue Spring and octagonal nozzle of these five. And TV-type dissolved gas distributor, which is for the orifice, single-hole and up and down large parallel disc gap these three. TS-type dissolved gas distributor, it is for the orifice, single-chamber and the cylinder of the three.

3. Is the electrostatic discharge device itself charged? And, metal electrostatic discharge device, the connector non-metallic material, the resistance is how much?

The electrostatic discharge device itself is not charged, because it is the release of the electrostatic charge, so that it itself is impossible to live. While the metal electrostatic discharge device of this kind, its connector non-metallic material, its resistance is required under 50 ohms. Moreover, it can not exceed this limit.


Copyright © Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd. All Rights Reserved.
QR Code
[[Html_Custom]]