Email:ds5898@163.comWuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

The main performance and advantages of the half-bridge peripheral drive scraper

The half bridge type peripheral drive scraper is mainly used for the mud scraping process of the circular sedimentation tank in the process of its use, and to a certain extent, mainly uses the middle water inlet and the mud discharge, and the peripherals thereof are in operation. Drainage can effectively ensure the uniformity of the water flow. To a certain extent, it uses the self-priming mud for level difference, scrape scum removal and overload protection devices.

During the operation of the half bridge type peripheral drive scraper, the sewage will effectively diffuse through the flow tube from the center inlet pipe of the tank, and will evenly show its radial outflow to a certain degree, under normal circumstances.

Suspended sludge is deposited at the bottom of the pool after sedimentation. The supernatant passes through the overflow weir and drains out of the tank through the discharge trough. The sludge scraper scrapes from the pool to the center and collects the mud trough. The water pressure in the pool passes through the sludge. Tube out of the pool.

The main beam of the half-bridge peripheral drive scraper will be driven by the peripheral driving device. When it is in use, the central rotating bearing will be used as the axis to drive along the pool top at a line speed of 2.0m/min. The main beam lower connecting bracket , sludge scraper and so on. A scum scraper is installed near the liquid surface and extends along the center stabilizer to the hinge scraper. When the main girder rotates, the dross scraper scoops the scum on the liquid surface from the center of the pool toward the pool and collects in the hinged type. In the slag scrap area, the collected scum moves along with the host to the slag bucket in the pool and is scraped into the slag bucket by the scraping hinge action and discharged to the outside of the pool.

The main performance of half-bridge peripheral drive scraper

1. The bottom of the tank is muddy and the surface of the water is slag. In the operation, the drive device is mainly driven by a shaft-mounted gear motor and an active roller. It is compact to a certain extent and has high mechanical efficiency.

2. The parallel misalignment line scraper of the half-bridge peripheral drive scraper has good continuity in use. To a certain extent, it is mainly the efficiency of the mud collection, and the scraper rubber plate is installed under the stainless steel scraper. , to ensure that the mud is completely clean, there will be no floating mud phenomenon.

3. The slope ratio of the bottom of the pool is 1:10. Sludge resistance is negligible when scraping mud. Special hinged support structure has strong overload capacity.

4. The main beam is made of square steel and has strong structural strength. After the hot-dip galvanizing, the top-coat paint is applied and the anti-corrosion performance is strong.

5. Easy to operate, remote control can be achieved.http://www.shallowairfloatation.com/


Copyright © Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd. All Rights Reserved.
QR Code
[[Html_Custom]]