Email:ds5898@163.comWuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd

Traveling sludge scraping and sucking machine is ideal for dredging equipment

The traveling sludge scraping and sucking machine will be equipped with fixed platform across sedimentation tank, sediment precipitation in the bottom of sewage, sludge scraper set precipitation sludge in the center set of mud, the use of sludge pump sludge discharge.This sludge scraper device is relatively simple in structure, stable in transmission, low in operating cost, and better in scraping mud. It is an ideal dredging equipment.

The traveling sludge scraping and sucking machine is often used in sewage treatment plants and water works to settle the sedimentation at the bottom of the pool to scrape the sludge into the suction hole.The traveling sludge scraping and sucking machine is by working bridge, sludge scraper ,scum shave their device, intermediate support, driving device and electric equipment, electric control part, such as patchwork, working bridge using truss structure, light weight, good rigidity.

The driving wheel of the traveling sludge scraping and sucking machine is made of steel frame with abrasion resistant rubber. The friction coefficient is large and the operation is smooth.The traveling sludge scraping and sucking machine is mainly used to water supply and drainage engineering of advection sedimentation tank in the mud, suction way according to the requirements of users, including siphon type, two suction pump and pump suction both siphon type three for us to choose.

Siphon type submersible pump with water injector or is adopted by the vacuum pump will form the siphon, in large part by use of sedimentation tank and mud tank liquid level difference of mud, directly will use a submersible sewage pump pump suction extraction precipitation sludge.

The traveling sludge scraping and sucking machine is controlled by PLC, which is based on the whole process of the equipment suction machine or the half-way operation.In this respect, it is very important to use time to control the cycle of the suction dredge, or the mud pull meter to detect the mud at the bottom of the pool automatically.The amount of mud can be adjusted automatically according to the sludge concentration so as to achieve the purpose of saving water.http://www.shallowairfloatation.com/


Copyright © Wuxi Wanchuan Environmental Equ-Ipment Technology Co.,Ltd. All Rights Reserved.
QR Code
[[Html_Custom]]